Leaky ductwork is one of the most common reasons a Plainville home has a bedroom that never cools down in July or a heating bill that keeps climbing every January. AeroSeal duct sealing closes those leaks from the inside of your ductwork, without opening walls, ceilings, or finished basements. TMS Comfort tests your duct system before and after sealing, so you see exactly how much air your home was losing and how much is now reaching your rooms.
How AeroSeal Seals Air Duct Leaks From the Inside
Traditional duct sealing only reaches the sections a technician can see and touch. In most Connecticut homes, a large share of the ductwork is hidden behind drywall, above ceilings, or tucked into tight attic spaces. AeroSeal solves that problem by working from the inside.
Our technician temporarily blocks your supply registers and return grilles, then connects the AeroSeal equipment to your duct system. Pressurized air carries tiny particles of sealant through the ducts. As air escapes through a crack, gap, or loose joint, the particles collect at the edges of the opening and build up until the leak is closed. The process seals leaks up to about 5/8 of an inch wide, and a computer tracks the drop in leakage in real time, so there is no guesswork about the result.
Signs Your Connecticut Home Has Leaky Ductwork
Duct leaks rarely announce themselves, but they leave clues. You may have leaky ducts if you notice:
- Rooms that are always too hot or too cold compared to the rest of the house
- Dust that settles on furniture soon after you clean
- Energy bills that stay high even with a newer furnace or air conditioner
- A system that runs for long stretches without reaching the thermostat setting
- Ductwork that runs through an unfinished attic, garage, crawl space, or basement
- Upstairs rooms in a Cape Cod or colonial that feel stuffy in summer
Many homes in Plainville, Bristol, and New Britain were built decades ago, and their ductwork has been extended, patched, or connected to new equipment over the years. Every one of those joints is a possible leak point.
Why Sealed Ducts Matter for Comfort and Energy Use
According to ENERGY STAR, a typical duct system loses about 20 to 30 percent of the air moving through it to leaks, holes, and poorly connected sections. In Connecticut’s climate, that loss happens in both seasons: heated air escapes during long winters, and cooled air escapes during humid summers. Your furnace, air handler, or heat pump has to run longer to make up the difference.
Leaks also affect the air you breathe. Ducts with gaps in an attic or basement can pull in dust, insulation fibers, and musty air, then deliver it straight to your living space. Sealing your ducts is one of the most practical steps you can take toward better indoor air quality in your home.
What to Expect During Your AeroSeal Appointment
We keep the process simple, and you will know the price before any work begins. A typical AeroSeal visit follows these steps:
- Pre-seal test. Your technician measures how much air your duct system is leaking and walks you through the number.
- Preparation. Registers are covered, and your furnace, air conditioner coil, and other equipment are isolated so the sealant only travels through the ductwork.
- Sealing. The AeroSeal equipment runs while the computer tracks the leakage as it drops.
- Post-seal test and report. You receive a before-and-after report that shows how much leakage was eliminated.
Most homes are completed in a single day, and your heating and cooling system is ready to use when the technician leaves.
AeroSeal and the Rest of Your HVAC System
Sealed ductwork helps every part of your comfort system work the way it was designed. If you are planning heating installation or AC installation, sealing your ducts at the same time helps your new equipment deliver its full capacity to every room.
Duct sealing also pairs well with regular furnace maintenance and AC maintenance. Clean equipment and tight ducts together keep airflow steady from October through the humid weeks of August. For homes with allergy concerns, a sealed system also makes air filtration system installation more effective, since air can no longer bypass the filter through leaky returns.
Not sure where your home stands? Indoor air quality testing can help identify whether duct leakage is contributing to dust, odors, or uneven comfort.
Duct Sealing for Homes in Plainville and Nearby Towns
Our team works from 74 Northwest Drive in Plainville and serves homeowners throughout Hartford County and central Connecticut, including Bristol, Southington, New Britain, Farmington, Berlin, Newington, and West Hartford. You can see the full list of towns on our Connecticut service areas page.
When you call TMS Comfort, a licensed technician explains what is happening with your ductwork, gives you upfront pricing before any work begins, and backs the job with our 100% customer satisfaction guarantee. Call 860-342-8867 or schedule service online to book your AeroSeal duct sealing assessment.








