Total Mechanical Systems (TMS) installs smart thermostats and home automation devices for homeowners in Plainville, CT and across central Connecticut. Because we are both a licensed electrical contractor and a full-service HVAC company, we can confirm that a new thermostat is actually compatible with your furnace, boiler, heat pump, or ductless system, run a new thermostat wire when one is needed, and program the system so it saves energy without leaving you cold on a January morning. Call 860-342-8867 or request service online to schedule an installation.
Smart Thermostat and Home Automation Services We Provide
Our smart home work covers the devices that connect directly to your home’s wiring and your heating and cooling equipment:
- Smart thermostat installation: ecobee, Google Nest, Honeywell Home, and Emerson Sensi models, plus manufacturer thermostats like the Lennox iComfort and Carrier Infinity controls for communicating systems.
- C-wire and thermostat wiring upgrades: adding the common wire most Wi-Fi thermostats need, or installing a power adapter when running new wire isn’t practical.
- Zoned and multi-thermostat setups: separate controls for upstairs, downstairs, and finished basements, common in Connecticut colonials and capes with boiler zones.
- Smart switches and dimmers: hardwired switches that control lights on a schedule or from your phone, including three-way and multi-switch circuits.
- Smart smoke and CO detectors: connected alarms that send alerts to your phone, installed as part of our smoke and CO detector installation service.
- Thermostat replacement and troubleshooting: blank screens, short cycling, Wi-Fi dropouts, and thermostats that no longer communicate with the equipment.
Will a Smart Thermostat Work With My Heating System?
Usually yes, but the right model depends on what heats your home. This is where most do-it-yourself installs go wrong in Connecticut, because our housing stock has a wide mix of systems:
- Gas or oil furnaces and central AC: compatible with nearly every smart thermostat, though many older homes lack a C-wire.
- Hot water and steam boilers: often wired with only two thermostat wires, and some older systems use millivolt controls that standard smart thermostats can’t run.
- Heat pumps: need a thermostat that supports reversing valves and auxiliary heat, with settings that keep backup heat from running when the heat pump can handle the load on its own.
- Electric baseboard heat: runs on 240-volt line-voltage thermostats, which require a line-voltage smart model. A standard low-voltage smart thermostat on these circuits is a safety hazard.
- Ductless mini-splits and communicating systems: usually work best with the manufacturer’s own controller or a compatible Wi-Fi adapter.
Before we recommend a thermostat, a TMS technician checks your equipment, wiring, and staging so the device you buy will actually work, and work well.
Signs It’s Time to Upgrade Your Thermostat
- Your thermostat is a manual or older programmable model you never set up
- Rooms or floors stay noticeably warmer or colder than the setting
- Your heating or AC system turns on and off in short bursts
- You want to adjust the temperature remotely or check your home during winter trips
- You recently installed a heat pump or ductless system and need better control of it
- Your heating bills have climbed and you want usage reports to see why








