Hard water, rusty stains, or a strange taste can all point to a problem with your water. TMS provides water quality testing for homeowners across Connecticut from our home base in Plainville, CT. Our water treatment specialists test your water and recommend the right solution for your home. Call 860-342-8867 to schedule your water test.
Why Test Your Home’s Water?
You cannot fix a water problem until you know what is causing it. Many water issues look alike. Orange stains, scale, and bad smells can each have a different cause. A water test shows what is really in your supply. That way, you only pay for the treatment you need.
Testing matters even more if your home uses a private well. There are many treatment options for household wells, and no single treatment protects against every problem. A well water test is the place to start.
What Are the Signs You Should Test Your Water?
Your water often tells you something is wrong before a test does. Watch your sinks, tubs, laundry, and glasses for clues. Here are common signs that it is time for a water test.
- White spots on dishes and glassware
- Scale buildup on faucets and showerheads
- Soap that does not lather well
- Orange, red, or brown stains on sinks, toilets, or laundry
- Blue-green stains on fixtures
- A metallic, bitter, or rotten egg taste or smell
- Pinhole leaks in copper pipes
- Dry, itchy skin or hair after showering
If you notice one or more of these signs, a test can show what is causing it.
What Does a Water Quality Test Check For?
A home water test looks at the common problems found in Connecticut water. TMS uses the results to match your home with the right treatment. Here is what each problem means for your home.
Hardness
Hard water has high levels of calcium and magnesium. Connecticut is known for hard water. It leaves scale in pipes, water heaters, faucets, and showerheads. It also makes soaps and detergents work less well.
Iron and Manganese
High iron causes orange staining and can give water a metallic taste. Elevated iron and manganese can also cause a rotten egg odor. Over time, iron buildup can damage fixtures and appliances.
pH Level
Ideally, water should have a pH between 6.5 and 8.5, with 7 being neutral. Water below 6.5 is acidic. Acidic water is common in Connecticut wells and can corrode pipes and fixtures. TMS can measure your water’s pH level and recommend the right fix.
Drinking Water Contaminants
Many homeowners want to know what is in the water from the kitchen tap. Contaminants such as lead, chlorine, fluoride, pesticides, sulfates, and nitrates can affect drinking and cooking water. Acidic water can also leach lead from older pipes and solder, especially in homes built before 1986.
What Happens After Your Water Test?
Once the team knows what is in your water, the next step is simple. Your specialist explains the results in plain language and recommends a solution that fits your water and your budget. TMS installs and services a full range of water treatment solutions for Connecticut homes.
Water Softeners
A water softener removes the calcium and magnesium that make water hard. Softer water means less scale, spot-free dishes, and brighter laundry with up to 50% less detergent. A softener can also reduce your water heater’s energy use by up to 29%.
Iron Water Filters
An iron water filter removes high levels of iron and manganese. It stops rust stains and iron-tasting water, and it can eliminate the rotten egg smell.
pH Neutralizers
A pH neutralizer raises the pH of acidic water to a safe, neutral level. It helps protect your entire plumbing system from corrosion and premature failure.
Reverse Osmosis Systems
A reverse osmosis system treats your drinking and cooking water. It filters out about 90% of mineral and biological contaminants, including fluoride, lead, chlorine, pesticides, sulfates, and nitrates.
Should You Treat the Whole House or Just Your Drinking Water?
Your test results help answer this question. A whole house system treats all the water entering your home. It handles problems like hardness, iron, and pH in every pipe and fixture. A reverse osmosis system is usually installed at one spot, like your kitchen sink. It focuses on the water you drink and cook with. Many homeowners use both for complete water treatment.
How Does Water Quality Affect Your Plumbing?
Water problems do more than change the taste. Hard water leaves scale inside pipes and water heaters, so the heater works harder to warm your water. Acidic water corrodes copper pipes and can cause pinhole leaks. Iron leaves stains and buildup on fixtures, dishwashers, and washing machines. Over time, all of this can shorten the life of your plumbing and appliances. Treating the water protects the system behind it. If you already have damaged pipes or fixtures, our licensed plumbers can help with the full range of plumbing services.








