Don’t wait for a catastrophe: Be alert for these indicators that your water heater is about to fail.

Most people have no idea that their water heater is about to fail. But there are signs to watch for (and we’re not just talking about soppy carpet or water running from under the garage).

1. How old is your water heater?

It’s crucial to know the age of your water heater. Find the age by looking for the serial number on the manufacturer’s sticker on the upper portion of the water heater

The serial number contains the date that the water heater was manufactured. But it won’t look the way a date is normally written. Instead, the serial number will have a date code such as “F051052638”.

F is for the month and F is the sixth letter in the alphabet, so it represents the sixth month, June. Next, the first two digits of the serial number are 05, which represents the year, 2005. So this water heater was made in June 2005. Each manufacturer has a similar date code, and they can vary; check the manufacturer’s website to learn more.

Generally, most water heaters that are more than 10 years old should be considered for replacement.

2. Rusty water

If you discover rusty water coming from your water heater and it only comes from the hot side piping in your home, this can be a sign that your water heater is rusting away on the inside and it may begin to leak soon.

But if you have galvanized piping, you may have rusty pipes. A good test to avoid replacing a functioning water heater is to drain a few five-gallon buckets of hot water out of the water heater. By the third bucket, if the water from your heater is still coming out rusty, then most likely the water heater (not the piping) is at fault.

3. Rumbling and noise

As a water heater ages, sediment will build up on the bottom of the tank. As the sediment is heated and reheated, it eventually will harden.

When this happens, you can often hear rumbling or banging sounds coming from the water heater as it is heating up. This is a sign that the water heater is at the end of its useful life.

The layer of hardened sediment means:

Less efficiency — the heater will have to use more gas or electricity to heat the water.

More damage — the extra time spent heating the water will cause more wear on the metal tank and lead to more brittle metal that can crack and develop tiny holes. If you start to hear rumbling from your water heater, keep an eye out for any small leaks. If you find one, then it may be time to replace your water heater.

4. Water around the water heater

If you notice moisture around your water, you may have a small leak or a fracture in the tank. As the metal heats, it expands and if there are slight fractures, water may leak from the tank. Once the metal has cooled the inner tank will stop leaking.

However, before replacing your water heater, make sure there are no other leaks coming from either the fittings or connections to the tank. Also, make sure the temperature/pressure overflow pipe is not leaking. If all of the connections and fittings are dry, it may be time to replace the water heater.

If you are concerned about water heater failure or if you discover any of the signs above, contact us at Total Mechanical Systems by calling or texting 860-314-1518 and we will get one of our experienced technicians out to you as soon as possible. We’re here to make sure you have the most efficient and safe water heater in your home day in and day out.

Original Article: https://www.angieslist.com/articles/4-signs-your-water-heater-about-fail.htm